CX-1 User Tips and Recommendations


Foliar Application

Pressure: Ideal pressure for good coverage a droplet size is 40-50 psi. Lower or higher pressures will not adversely affect CX-1.
Spray Tips: Hypro TR80-04 or equivalent. Avoid using very small orifice or nozzles with 2 holes to avoid clogging. NOTE: remove filter basket from nozzle caps.
Strainers and Filtering: 20 mesh Banjo T-strainer or equivalent. Filter CX-1 and all tank mixes using a Banjo K-strainer fitted with 20 mesh filter.
Agitation: Agitation is recommended during all operations of filling, transport and application.
Total Gallons per Acre: If applying CX-1 only gallons per acre can be as low as 5-10 gpa. Follow manufacturers recommendation if using other tank partners. Example: liquid fish 1 part fish to 15-20 parts water.
Maintenance: Use all mixed CX-1 within 6-8 hours. Flush tank and booms with clean water after use. Use an approved sanitizer for long term storage or removal of bio-film.

 

In Furrow and x2 Application

Pressure and Orifice: Use the largest orifice and reduce pressure to obtain proper application rate. CX-1 can be used as a stand alone product or mixed with other products such as liquid fish or molasses.
Strainers and Filtering: 20 mesh Banjo T-strainer or equivalent. Filter CX-1 and all tank mixes using a Banjo K-strainer fitted with 20 mesh filter.
Agitation: Agitation is recommended during all operations of filling, transport and application.
Maintenance: Use all mixed CX-1 within 6-8 hours. Flush tank and planter with clean water after use. Use an approved sanitizer for long term storage or removal of bio-film.

 

Miscellaneous Tips:

Fill: Equipment starting with lightest orifice and reduce pressure to obtain proper application rate. CX-1 can be used as a stand alone product or mixed with other products such as liquid fish or molasses.
Mix: Purple Cow Activator (dry powders) with a small amount of water in a 5 gallon bucket to make a slurry before adding to sprayer or mix tank.
Sample: Always sample or jar test new mixes first. 

 

Nozzle

T-Strainer

K-Strainer

BACK TO TOP